4550 Post Oak Place, Suite 202

Houston, Texas 77027

Tel.: (713) 623-6900

Fax: (713) 623-6905

 Everything needed for Drilling and Workover Operations

  HOME RIGS EQUIPMENT PRODUCTS BITS & BREAKERS NEW ARRIVALS CONTACT US LOCATIONS

 

New Solids Control Equipment

Screen Panels

Complete Mud Systems

Shakers

Mud Gas Separators

Centrifugal Pumps

 

 

Desanders

 

 

Desilters

Mud Cleaner

 

Hoppers

Degassers

Mud Guns

Centrifuges

 

Agitators

 

Current inventory of used Shale Shakers

 

   Derrick Flo-Line Cleaner Plus (Model 58). Shaker has adjustable while running deck angle copied from previous model 48, with only a wider deck area. This basket width is 60” versus the 48” standard deck. Deck angle can be lowered down to -5 degrees which works well on sticky solids conveyance. This shaker contains two vibrating motors of 575volt, 1750rpm’s, producing a linear motion in the 4 – 4.5G range. The motor model numbers are (RX24-18-575-6) and the serial numbers are (R-398, R-519). This shaker is in running condition however the adjustable deck angle is inoperable. The Shaker will run only in fixed position. The weir assembly located in the rear possum belly is cracked and needs repair.  This shaker’s appearance is Fair, with no cracks nor major rust.

 

Derrick Flo-Line Cleaner Plus (Model 58). Shaker has adjustable while running deck angle copied from previous model 48, with only a wider deck area. This basket width is 60” versus the 48” standard deck. Deck angle can be lowered down to -5 degrees which works well on sticky solids conveyance. This shaker contains two vibrating motors of 575volt, 1750rpm’s, producing a linear motion in the 4 – 4.5G range. The motor model numbers are (RX24-18-575-6) and the Serial numbers are (R-996, R-1011). This shaker’s appearance is Good, with no cracks nor rust.